10 Main Application Fields for Valves

10 Main Application Fields for Valves
Time:2018-10-12 From: NAFCO | Brass Valves China Manufacturer
 
1. Valves for petroleum installations
 
1). Refining equipment, most of the valves used in refining equipment are pipeline valves, mainly gate valves, globe valves, check valves, safety valves, ball valves, butterfly valves, steam traps, among which the gate valve accounts for about 80% of the total number of valves. (valves account for 3% to 5% of the total investment of the device)
 
2). Chemical fiber equipment, chemical fiber products mainly include polyester, acrylic and vinylon. The ball valve and the jacket valve (the jacketed ball valve, the jacketed gate valve and the jacketed shut-off valve) of the valve to be used. 
 
3). Acrylonitrile device. The device generally needs to use the valve produced by the scale, mainly for the gate valve, the stop valve, the check valve, the ball valve, the steam trap, the needle-shaped stop valve, the plug valve, wherein the gate valve accounts for about 75% of the total valve.
 
4). Synthetic ammonia unit. Because the syntheses of ammonia and purification methods are different, the process flow is different, and the technical functions of the required valves are also different. At present, domestic ammonia plants mainly need gate valves, globe valves, check valves, traps, butterfly valves, ball valves, diaphragm valves, regulating valves, needle valves, safety valves, high temperature and low temperature valves.
 
Brass Valves China
 
 
 2. Hydropower station application valves
 
China's power station construction is developing in the direction of large-scale, so it is necessary to use large-diameter and high-pressure safety valves, pressure reducing valves, globe valves, gate valves, butterfly valves, emergency blocking valves and flow control valves, spherical sealing instruments. Globe valve, (according to the national “10th Five-Year Plan”, except for Inner Mongolia and Guizhou provinces, which can build more than 200,000 kilowatts, other provinces and cities can only build units of 300,000 kilowatts or more).
 
3. Metallurgical application valves
 
The alumina behavior in the metallurgical industry mainly requires the use of wear-resistant slurry valves (in the flow-type shut-off valve) and the adjustment of the trap. The steelmaking industry mainly needs metal sealed ball valves, butterfly valves and oxidized ball valves, cut-off flash and four-way reversing valves.
 
4. Marine application valve
 
With the development of offshore oilfield exploitation, the amount of valves required for marine flat hair is gradually increasing. The offshore platform needs to use a shut-off ball valve, a check valve, and a multi-way valve.
 
Brass Gate Valves China
 
 5. Food and medical application valves
 
The industry mainly needs stainless steel ball valves, non-toxic all-plastic ball valves and butterfly valves. Among the above 10 types of large-scale valve products, the demand for general-purpose valves is relatively large, such as instrument valves, needle valves, needle-shaped globe valves, gate valves, globe valves, check valves, ball valves, butterfly valves。
 
6. Rural and urban building application valves
 
Urban construction systems generally use low-pressure valves, and are currently developing in the direction of environmental protection and energy conservation. Environmentally friendly rubber plate valves, balancing valves, and mid-line butterfly valves and metal-sealed butterfly valves are gradually replacing low-pressure iron gate valves. Most of the valves used in urban construction in the country are balance valves, soft seal gate valves, butterfly valves, etc.;
 
7. Valves for rural and urban heating
 
In the urban heat generation system, a large number of metal sealing butterfly valves, horizontal balancing valves and direct-buried ball valves are needed. Because of this type of valve, the longitudinal and lateral hydraulic imbalance problems of the pipeline are solved, and energy saving and generation are achieved. The purpose of heat balance.
 
Radiator Valves China
 
8. Environmental protection application valve
 
In the domestic environmental protection system, the water supply system mainly needs the middle line butterfly valve, soft sealing gate valve, ball valve and exhaust valve (used to exclude the air in the pipeline). Sewage treatment systems mainly need soft seal gate valves and butterfly valves;
 
9. Valves for gas
 
City gas accounts for 22% of the entire natural market, and the valve usage is large, and there are many types. Mainly need ball valve, plug valve, pressure reducing valve, safety valve;
 
10. Pipeline application valves
 
Long-distance pipelines are mainly crude oil, finished products and natural pipelines. The valves that require a large amount of such pipelines are forged steel three-piece full-bore ball valves, sulfur-resistant slab gate valves, safety valves, and check valves.
 
Brass Ball Valves China
 
--------- The End ----------
 
This article is presented by NAFCO, all copyrights reserved.
NAFCO is a quality China brass valve manufacturer and supplier, with full line of brass valves China for your selection, such as brass ball valvesbrass gate valves,brass radiator valvesbrass angle valves, as well as relevant brass fittings. Please don't hesitate to contact us for any questions at support@acrofluid.com.
 
 
 
 

 

Previous:  What Is Thermostatic Valve and How to Select Next:  NAFCO | Identify Valves with Painting
Resources
Product Catalog
Products